Metal Deck Accessories | Sheet Metal | Metal Deck

CORDECK METAL DECK ACCESSORIES

Let Cordeck be your ONE-STOP SHOP for all your Metal Deck Accessory needs. Our complete inventory of steel flat stock, allows us to produce closures, filler and finish strips, pour stops, hanger tabs, valley and deck plates, J-channels, rubber closures, sump pans, fasteners, mid-span screws, weld washers, and more – in all gauges.
In addition to these accessories, our CNC-controlled press brakes and folding machines, precise sheering capabilities, on-site engineering services, and short lead times mean that we can produce architectural, roofing, or construction parts to your specific needs. A Cordeck DEXPERT® can help you identify exactly what’s needed for your project.

Cordeck is your single-source for all the accessories you need to complete your next job. Our complete inventory of steel flat stock, allows us to produce closures, filler and finish strips, pour stops, hanger tabs, valley and deck plates, J-channels, rubber closures, sump pans, fasteners, mid-span screws, weld washers, and more – in all gauges.

In addition to these accessories, our CNC-controlled press brakes and folding machines, precise sheering capabilities, on-site engineering services, and short lead times mean that we can produce architectural, roofing, or construction parts to your specific needs. A Cordeck DEXPERT® can help you identify exactly what’s needed for your project.

REQUEST A QUOTE FOR METAL DECK

Channel Closure

Available Gauges: 20, 18, 16, 14, 12, 10

Channel Closures are designed to close off an area around a channel before the concrete is poured.

Column Closure

Available Gauges: 20, 18, 16, 14, 12, 10

Column Closures are designed to close off an area around a column before the concrete is poured.

End Closure

Available Gauges: 20, 18, 16, 14, 12, 10

An End Closure is a metal deck floor accessory that is placed over the ends of deck to prevent concrete, water, or even sound from leaking out of the deck flutes.

Finish Strip

Available Gauges: 20, 18, 16, 14, 12

Finish Strips are designed to close gaps between the weak end of the metal deck and the adjacent beam. It also prevents poured concrete from falling through the gaps.

Heavy Duty Self Drilling Fasteners

J Closure

Available Gauges: 20, 18, 16, 14, 12, 10

J Closure are meant to be fastened to the open ends metal decking to achieve a tight fitting closure and support.

Piercing Hanger Tab

An accessory attached to metal decking used to secure hanger wire for ceiling tile grids.

Pour Stop

Available Gauges: 20, 18, 16, 14, 12, 10

A Pour Stop, also known as screed angle or bent plate, is an angled piece of steel, used to contain concrete being poured within a perimeter of metal decking.

Ridge Plate

Available Gauges: 20, 18, 16, 14, 12, 10

The Ridge Plate is a piece of trim that is installed at the peak of the roof. It Protects the gap at the peak where both slopes meet.

Rubber Closures – Topside Plugs

Rubber Closures seal the ridge cap, protecting the metal deck from moisture.

Rubber Closures – Topside Strips

Rubber Closures seal the ridge cap, protecting the metal deck from moisture.

Rubber Closures – Underside Plugs

Rubber Closures seal the ridge cap, protecting the metal deck from moisture.

Rubber Closures – Underside Strips

Rubber Closures seal the ridge cap, protecting the metal deck from moisture.

Side Closure

Available Gauges: 20, 18, 16, 14, 12, 10

A Side Closure closes open ends of metal floor deck, preventing concrete from spilling through the ends of decking.

Standard Mid Span Screws

Sump Pan

Available Finishes: Galvanized - G60, Galvanized - G90, Stainless Steel

The Sump Pan is a roof deck accessory that is designed to work with roofs drainage system.

Valley Plate

Available Gauges: 20, 18, 16, 14, 12, 10

A Valley Plate protects the meeting edges of two metal deck sheets.

Weld Washer

Weld Washers prevent holes while welding metal deck. These small pieces of galvanized steel are designed with a small curved to fit into the valley of metal decking.